图书简介
This multi-disciplinary book presents the most recent advances in exergy, energy, and environmental issues. Volume 2 focuses on fundamentals in the field and covers current problems, future needs, and prospects in the area of energy and environment from researchers worldwide. Based on some selected lectures from the Eleventh International Exergy, Energy and Environmental Symposium (IEEES-11) and complemented by further invited contributions, this comprehensive set of contributions promote the exchange of new ideas and techniques in energy conversion and conservation in order to exchange best practices in ’energetic efficiency.’ Included are fundamental and historical coverage of the green transportation and sustainable mobility sectors, especially regarding the development of sustainable technologies for thermal comforts and green transportation vehicles. Furthermore, contributions on renewable and sustainable energy sources, strategies for energy production, and the carbon-free society constitute an important part of this book.
A Novel Fuzzy logic controlled vienna rectifier to extract maximum power in the grid connected wind energy system applications.- Performance Analysis of UPFC and DPFC in a Grid connected Hybrid Solar-Wind generation system.- Design and Fabrication of a Lighter than Air Wind Turbine.- Analysis of different geometrical impacts on wind turbine blades.- Intelligent Control Based Effective Utilization of Renewable Energy Sources.- Hybrid renewable power production on unfavourable conditions- a review.- Performance and emission studies of waste vegetable oil as blends with diesel and kerosene – an economic route for valorizing liquid waste.- Combustion, performance and emission analysis of VCR diesel engine using water emulsion in flaxseed based biodiesel blend.- Analysis of cyclic variations and combustion behaviour of liquid phase hydrocarbons under uniform axial and radial magnetic fields.- Combustion, noise and vibrational analysis of linseed biodiesel fuelled engine.- Experimental Investigation on performance and emissions of HCCI engine using Kusum oil biodiesel blends.- Load frequency control in three area interconnected power system using PID tuning based on artificial bee colony optimization.- A High Gain Non Isolated DC-DC Boost Converter With Two Level Output voltage for PV Applications.- Automatic generation control of hydro-thermal power system using 2-DOF fractional order PID controller optimized with Crow Search Algorithm.- Design of Quasi oppositional based CSA optimized cascade PI-fractional order PID controller for interconnected power system.- Optimization of the controller parameter to improve the frequency response in the hybrid system.- IOT based performance monitoring and control system for real-time transformer.- Automatic Generation Control Of Multi Area Power System.- Numerical simulation of reacting flow field in a solid-propellant ducted rocket.- Computational study of safe separation of sabot from penetrator in APFSDS.- Analysis of Bidding strategies in virtual power plant.- DSMC Simulation of Rocket Plume Interactions with Extra-Terrestrial Regolith.- Shock Tube Performance Studies with Air and Argon Using Numerical Simulation.- Simulation of continuous multistage fluidized bed dryer for exergy analysis using Aspen Plus simulator.- Computational fluid dynamic analysis of exhaust gas calorimeter.- Analysis of Internal Flow and Velocity Characteristics of Threaded Convergent Nozzle Using CFD For Abrasive Jet Application.- CFD simulation of 1.5MW HAWT with vortex generator.- Design, Development and Validation of an Intake System for an FSAE Racecar.- An Efficient Lattice Boltzmann Model for 3D Transient Flows.- 2D numerical simulation of downburst simulator in the Wall of Wind.- CFD Aided Design: Case Studies.- Energy Efficient Automobile Air-conditioning system through effective condenser cooling.- A comparative analysis of solar assisted ORC and refrigeration system for supercritical working fluids.- Thermodynamic Analysis of a Combined Vapour Compression Refrigeration Cycle and Organic Rankine Cycle Connected via a Sharing Heat Exchanger.- Performance optimization of chiller used for commercial building air conditioning.- Exergetic Investigations of a Multistage Multi Evaporator Vapour Compression Refrigeration System.- Experimental analysis of freeze drying and estimating the transient moisture contents of food products.
Trade Policy 买家须知
- 关于产品:
- ● 正版保障:本网站隶属于中国国际图书贸易集团公司,确保所有图书都是100%正版。
- ● 环保纸张:进口图书大多使用的都是环保轻型张,颜色偏黄,重量比较轻。
- ● 毛边版:即书翻页的地方,故意做成了参差不齐的样子,一般为精装版,更具收藏价值。
关于退换货:
- 由于预订产品的特殊性,采购订单正式发订后,买方不得无故取消全部或部分产品的订购。
- 由于进口图书的特殊性,发生以下情况的,请直接拒收货物,由快递返回:
- ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全(例如:光盘等)
并请在工作日通过电话400-008-1110联系我们。
- 签收后,如发生以下情况,请在签收后的5个工作日内联系客服办理退换货:
- ● 缺页/错页/错印/脱线
关于发货时间:
- 一般情况下:
- ●【现货】 下单后48小时内由北京(库房)发出快递。
- ●【预订】【预售】下单后国外发货,到货时间预计5-8周左右,店铺默认中通快递,如需顺丰快递邮费到付。
- ● 需要开具发票的客户,发货时间可能在上述基础上再延后1-2个工作日(紧急发票需求,请联系010-68433105/3213);
- ● 如遇其他特殊原因,对发货时间有影响的,我们会第一时间在网站公告,敬请留意。
关于到货时间:
- 由于进口图书入境入库后,都是委托第三方快递发货,所以我们只能保证在规定时间内发出,但无法为您保证确切的到货时间。
- ● 主要城市一般2-4天
- ● 偏远地区一般4-7天
关于接听咨询电话的时间:
- 010-68433105/3213正常接听咨询电话的时间为:周一至周五上午8:30~下午5:00,周六、日及法定节假日休息,将无法接听来电,敬请谅解。
- 其它时间您也可以通过邮件联系我们:customer@readgo.cn,工作日会优先处理。
关于快递:
- ● 已付款订单:主要由中通、宅急送负责派送,订单进度查询请拨打010-68433105/3213。
本书暂无推荐
本书暂无推荐