图书简介
Critical regimes of two-phase flows with a polydisperse solid phase form the basis of such widespread industrial processes as separation of various powdery materials and minerals dressing. It is impossible to describe such complicated flows analytically. Therefore, this study concentrates on invariants experimentally revealed and theoretically grounded for such flows. This approach can be compared with the situation in gases, where in order to determine principal parameters of their state, one does not need to measure the kinetic energy and velocity of each molecule and find its contribution to the temperature and pressure. These parameters are determined in a simple way for the system on the whole. A novel conception of two-phase flows allowing the formulation of their statistical parameters is physically substantiated. On the basis of the invariants and these parameters, a comprehensive method of estimating and predicting mass transfer in such flows is developed. It is noteworthy that the presented results are mostly phenomenological. Such an approach can be successfully extended to the separation of liquids, gases and isotopes. The book is intended for students and specialists engaged in chemical technology, mineral dressing, ceramics, microelectronics, pharmacology, power generation, thermal engineering and other fields in which flows carrying solid particles are used in the technological process.
Introduction; Chapter I. General ideas of mass transfer processes in critical regimes; 1. Granulometric characteristics of bulk material; 2. Distribution of different fractions in the process of separation; 3. Fractional separation curves and their properties; Chapter II. Principles of modeling processes in moving media; 1. Correlation between a full-scale process and its model; 2. Mathematical models construction; 3. Similarity criteria determination; Chapter III. System of particles of the same size class in a critical flow.; 1. Dynamics of mass motion of particles in a flow; 2. Definition of a statistical system; 3. Estimation of the state of a statistical system; 4. Principal statistical characteristics of the separation factor; Chapter IV. System of particles of several size classes; 1. Interaction of particles in a flow; 2. Forces caused by interactions of particles of various classes; 3. Two-phase flow entropy in critical flow regimes; 4. Main features of entropy in critical regimes; 5. Mobility factor; 6. Statistical identities; Chapter V. Principal statistical relationships of mass transfer in critical flow; 1. Mass exchange between the zone and the apparatus; 2. Determination of average values; 3. Cell and apparatus, entropy; 4. Separation at low concentrations; 5. General regularities for the zone; Chapter VI. Correlation between the apparatus and the cell.; 1. Coarse particles separation; 2. Fine particles separation; 3. Definition of mass transfer parameters; 4. Cellular model of separation; 5. Physical meaning of separation factors; 6. Extraction from a cell located in the zone; Chapter VII. Structural model of mass transfer in critical regimes of two-phase flows.; 1. Validation of the distribution coefficient; 2. Physical meaning of the distribution coefficient; 3. Analysis of distribution coefficient; 4. Analysis of experimental dependencies from the standpoint of structural models; 5. Check of the structural model adequacy; 6. Correlation between the structural and cellular models of the process; Chapter VIII. Correlation between statistical and empirical results; 1. Approximation of universal separation curve; 2. Principal separation parameters depending on the apparatus height; 3. Equal extractability of various size classes; Chapter IX. Entropy of composition. Optimization criterion.; 1. Entropy and particles stratification; 2. Evaluation of heterogeneity of powder composition; 3. Binary separation; 4. Multi-product separation; 5. Algorithms of optimization of separation into n components; 6. Mathematical model of separation into n components; 7. Optimum conditions for binary separation; 8. Optimum conditions for multi-product separation; Chapter X. Stability and kinetic aspects of mass distribution in critical regimes; 1. Entropy stability; 2. Particles distribution over the channel height; 3. Velocity distribution of particles of a narrow size class; 4. Kinetic aspect of the material distribution; Chapter XI. Critical regimes of two-phase flows in complicated systems; 1. Problem setting; 2. Mathematical model of a duplex cascade; 3. Mathematical model of a cascade process allowing control of the effect of the material feed site on separation results; 4. Cascade model with two or more material inputs into the apparatus; 5. Combined cascade classifiers; 6. Quality criterion for combined cascades; 7. Fractal principle of the construction of schemes of combined classifiers; 8. Some methods of combined schemes optimization; Chapter XII. Stochastic model of critical regimes of two-phase flows; 1. Principal definitions; 2. Statistical description of gravitational separation in turbulent flows; 3. Equations of particles motion taking into account their rotation around the center of mass in a turbulent flow; 4. Description of one-dimensional stationary process of gravitation separation in a turbulent flow; 5. One-dimensional model of a non-stationary process; 6. Statistical equations of random process of gra
Trade Policy 买家须知
- 关于产品:
- ● 正版保障:本网站隶属于中国国际图书贸易集团公司,确保所有图书都是100%正版。
- ● 环保纸张:进口图书大多使用的都是环保轻型张,颜色偏黄,重量比较轻。
- ● 毛边版:即书翻页的地方,故意做成了参差不齐的样子,一般为精装版,更具收藏价值。
关于退换货:
- 由于预订产品的特殊性,采购订单正式发订后,买方不得无故取消全部或部分产品的订购。
- 由于进口图书的特殊性,发生以下情况的,请直接拒收货物,由快递返回:
- ● 外包装破损/发错货/少发货/图书外观破损/图书配件不全(例如:光盘等)
并请在工作日通过电话400-008-1110联系我们。
- 签收后,如发生以下情况,请在签收后的5个工作日内联系客服办理退换货:
- ● 缺页/错页/错印/脱线
关于发货时间:
- 一般情况下:
- ●【现货】 下单后48小时内由北京(库房)发出快递。
- ●【预订】【预售】下单后国外发货,到货时间预计5-8周左右,店铺默认中通快递,如需顺丰快递邮费到付。
- ● 需要开具发票的客户,发货时间可能在上述基础上再延后1-2个工作日(紧急发票需求,请联系010-68433105/3213);
- ● 如遇其他特殊原因,对发货时间有影响的,我们会第一时间在网站公告,敬请留意。
关于到货时间:
- 由于进口图书入境入库后,都是委托第三方快递发货,所以我们只能保证在规定时间内发出,但无法为您保证确切的到货时间。
- ● 主要城市一般2-4天
- ● 偏远地区一般4-7天
关于接听咨询电话的时间:
- 010-68433105/3213正常接听咨询电话的时间为:周一至周五上午8:30~下午5:00,周六、日及法定节假日休息,将无法接听来电,敬请谅解。
- 其它时间您也可以通过邮件联系我们:customer@readgo.cn,工作日会优先处理。
关于快递:
- ● 已付款订单:主要由中通、宅急送负责派送,订单进度查询请拨打010-68433105/3213。
本书暂无推荐
本书暂无推荐